Raymond mill is a stone mill invented by a person named Raymond in Germany called Raymond mill, also called Raymond mill and Raymond mill. Raymond mill is a common milling equipment, also called Raymond mill, the English full name is Raymond mill, it is a traditional milling equipment. Mainly used for barite, calcite, potassium feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement with Mohs hardness not greater than 9.3 and humidity below 6% Ultra-fine grinding of more than 280 kinds of materials such as phosphate rock, gypsum, glass, and thermal insulation materials. What is the working principle of Raymond mill and how does Raymond mill work? Here, we will illustrate with detailed pictures.
1. What does the Raymond machine do?
2. Advantages and characteristics of Raymond machine
3. The working principle of Raymond mill
1. What does the Raymond machine do?
This is the first time I heard someone from Raymond Mill ask such a question, what does Raymond Mill do?

Raymond mill is a stone mill invented by a person named Raymond in Germany called Raymond mill, also called Raymond mill and Raymond mill. Raymond mill is a common milling equipment, also called Raymond mill, the English full name is Raymond mill, it is a traditional milling equipment. Mainly used for barite, calcite, potassium feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement with Mohs hardness not greater than 9.3 and humidity below 6% Ultra-fine grinding of more than 280 kinds of materials such as phosphate rock, gypsum, glass, and thermal insulation materials. What is the working principle of Raymond mill and how does Raymond mill work? Here, we will illustrate with detailed pictures.

Now you know what the Raymond mill is for, right?

This machine is a kind of ultra-fine grinding equipment for processing stones, which can crush stones to ultra-fine powder with a fineness of 80-400 mesh.

Stones that can be processed include hundreds of materials such as limestone, calcite, dolomite, marble, bentonite, kaolin, bauxite, rare earth, coal, charcoal, lime powder, putty powder, etc., but the feed particle size of the processed materials should be controlled within Below 3CM, if there are too many materials, they should be crushed with a crusher first, and large pieces can also be processed, but the equipment loss is relatively large.

The Raymond mill is a grinding roller that grinds materials under the action of centrifugal force, and the required fineness is achieved through winnowing through the joint action of the blower and the blower.

2. Advantages and characteristics of Raymond machine
1. Raymond mill has a three-dimensional structure, small footprint, and strong suitability. It becomes an independent production system from block to finished powder.

2. The fineness of the finished powder is uniform, and the screening rate is 99%. Jiangxi Raymond Mill, which is difficult for other milling equipment.

3. The transmission device of the pulverizer body adopts a closed gear box and a pulley, and the transmission is stable and the operation is reliable.

4. The important parts of Raymond wear are made of high-quality steel, and the wear-resistant parts are made of high-performance wear-resistant materials. The whole machine has high wear resistance and reliable operation.

5. The electrical system adopts centralized control, and the crushing plant can almost realize unmanned operation, which is convenient for maintenance.

3. The working principle of Raymond mill
After the large ore raw material is crushed to the required particle size by the jaw crusher, it is sent to the storage hopper by the elevator, and then sent to the main machine room by the feeder evenly and continuously for grinding. The powder is taken away by the airflow of the fan, and then classified by the powder classifier. The fine powder enters the cyclone powder collector through the airflow for separation and collection, and then is discharged from the powder outlet pipe, which is the finished powder. The air flow is sucked into the induced draft fan by the return air pipe at the upper end of the cyclone powder collector. The entire airflow system of the machine is in a closed cycle, and the cycle process is in a negative pressure state. Porcelain, bentonite, magnesite, pottery, bauxite... Non-metallic ores: gypsum, talc, graphite, fluorescent stone, calcite, zeolite, limestone, barite, apatite, wollastonite, feldspar, quartz... ...Metal oxides: ferromanganese ore, chromite ore, ilmenite ore, titanium oxide, bauxite...chemical synthesis: coke, petroleum coke, silicon carbide, barium sulfate, lead-zinc ore.... ..